RP-S02, I cannot control both relays from Homekit (via Matter)
Posted: Wed Jan 15, 2025 3:34 am
Questions from users:
Matter config can only control 1 switch (bottom one), the config shows 2 switches, turn on/off any of them will always turn on/off the bottom switchMQTT works fine.
Reply from Manufacturer
1. Delete the device from your Matter Hub app, such as Homekit;
2. On tasmota webUI, Configuration - Configure Matter - Current Configuration (Local Sensors and devices)
There are two relays, at the parameter column, they should be 1 and 2 (default is 0 and 1).
3. Click "Change configuration" to save. Then restart the device and pair it again via Matter QR code.
Matter config can only control 1 switch (bottom one), the config shows 2 switches, turn on/off any of them will always turn on/off the bottom switchMQTT works fine.
Reply from Manufacturer
1. Delete the device from your Matter Hub app, such as Homekit;
2. On tasmota webUI, Configuration - Configure Matter - Current Configuration (Local Sensors and devices)
There are two relays, at the parameter column, they should be 1 and 2 (default is 0 and 1).
3. Click "Change configuration" to save. Then restart the device and pair it again via Matter QR code.
- RP-S02_matter.PNG (41.01 KiB) Viewed 79 times