- neutral wire
- 2.4G WiFi (If you are dual band wifi router, please set a separate name for the 2.4G
1. Make sure there is real neutral wire in the outlet box (neutral wire is not used by traditional switch);
[*]Neutral Wire Identification
[*]Wiring examples
2. Connect all wires according to the labels (if you have wiring problem, create a ticket with photos of your current wiring condition. Click here)
WiFi Pairing
The switch is at pairing mode when power on, and you can see the hotspot like "tasmota-xxxx"
Tips: [WiFiconfig 2] is set in our customized firmware. Once it cannot link to a valid wifi router, the device will enter pairing mode. it means when you change a wifi router, it will enter pairing mode automatically.